Diameter 12 mm
Thread pitch 1,75 mm
Length 198 mm (192 mm with Spacer)
Base 10 mm
Which axle head do you need for your Croozer thru axle?
“N” axle head: If your Croozer is equipped with the Click & Crooz® system (= grey push button on the hitch connector) and the rear-wheel dropouts on your bicycle frame are flat and not blocked by other parts or components.
“XL” axle head: If your Croozer is equipped with the Click & Crooz® system (= grey push button on the hitch connector) and the rear-wheel dropouts on your bicycle frame are either not flat or blocked by other parts or components.
“A” axle head: Your Croozer is not equipped with the Click & Crooz® system? Then you need the “A” axle head with an adapter for mounting all standard axle hitches.
Diameter 12 mm
Thread pitch 1,75 mm
Length 198 mm (192 mm with Spacer)
Base 20 mm
Which axle head do you need for your Croozer thru axle?
“N” axle head: If your Croozer is equipped with the Click & Crooz® system (= grey push button on the hitch connector) and the rear-wheel dropouts on your bicycle frame are flat and not blocked by other parts or components.
“XL” axle head: If your Croozer is equipped with the Click & Crooz® system (= grey push button on the hitch connector) and the rear-wheel dropouts on your bicycle frame are either not flat or blocked by other parts or components.
“A” axle head: Your Croozer is not equipped with the Click & Crooz® system? Then you need the “A” axle head with an adapter for mounting all standard axle hitches.
Diameter 12 mm
Thread pitch 1,75 mm
Length 198 mm (192 mm with Spacer)
Which axle head do you need for your Croozer thru axle?
“N” axle head: If your Croozer is equipped with the Click & Crooz® system (= grey push button on the hitch connector) and the rear-wheel dropouts on your bicycle frame are flat and not blocked by other parts or components.
“XL” axle head: If your Croozer is equipped with the Click & Crooz® system (= grey push button on the hitch connector) and the rear-wheel dropouts on your bicycle frame are either not flat or blocked by other parts or components.
“A” axle head: Your Croozer is not equipped with the Click & Crooz® system? Then you need the “A” axle head with an adapter for mounting all standard axle hitches.
Thru Axle Adapter 12 - 198 - 1.75 A
Incl. spacer
| . | . |
|---|---|
| Length | L = 198 mm (without spacer) and L = 192 mm (with spacer) |
| Thread Pitch | 1.75 mm, diameter 12 mm |
| Thru Axle (Type) | 12 - 198 - 1.75 A |
Thru Axle Adapter A Manual
Article code: 12 - 198 - 1.75 A (L = 198 / L = 192). For the attachment of all standard axle hitches.
Store
GUIDE